| EPS® 2111 |
EPS 2111 is an all acrylic binder that can be used in lamination especially in blending with latex polychloroprene with no loss of adhesion. The polymer has broad adhesion to various substrates and good 180° peel and heat resistance. This polymer can also be used in high P:B loadings for pigmented caulks.
Not FDA approved. |
| EPS® 2113 |
EPS 2113 is an all acrylic latex pressure sensitive adhesives for permanent type applications. The polymer has also shown to be useful in formulating plasticizer free-pigmented caulks and film to film lamination.
This product is not FDA approved. |
| EPS® 2141 |
EPS 2141 is a styrenated acrylic emulsion offering excellent alkali and water resistance, with flexibility, for use on cementitious, wood, and metal substrates. When properly formulated, EPS 2141 can be used in duct sealant formulations to obtain perm ratings of less than 0.02, when tested in accordance with ASTM E-96. It can also be used in the areas of heated lamination with good adhesion over various substrates.
Not FDA approved. |
| EPS® 2143 |
EPS 2143 is a styrene acrylic binder that is good for heat seal lamination. The polymer has broad adhesion to various substrates such as Mylar and PVC, and good 180° peel resistance. This polymer also has pressure sensitive properties.
Not FDA approved. |
| EPS® 2257 |
| EPS 2257 is an all-acrylic, APEO-free emulsion offering excellent penetration, adhesion and water resistance on cementitious substrates. Gloss increases with multiple applications. Exterior exposure testing is in progress for exterior wood stains. |
| EPS® 2272 |
| EPS 2272 is a styrenated acrylic emulsion offering excellent water retention properties. EPS 2272 can be formulated to meet the requirements of ASTM C-309 and ASTM C-1315 Type I Class C cure and seal membranes. |
| EPS® 2293 |
| EPS 2293 is a self-crosslinking all-acrylic emulsion offering excellent adhesion and early water resistance for use in clear sealers over tiles and cementitious substrates. Clear coatings can be formulated less than 100 g/l VOC. |
| EPS® 2505 |
| EPS 2505 is a styrenated acrylic emulsion offering excellent early water resistance and higher solids. EPS 2505 provides paint formulators a low VOC waterborne system that is ideal for use in fast dry applications. |
| EPS® 2506 |
| EPS 2506 is a styrenated acrylic emulsion offering excellent early water and humidity resistance, as well as corrosion resistance. In addition, EPS 2506 can be formulated with a wide variety of co-solvents, and with it's excellent shear stability can be used in the grind phase of the formula. Due to these properties, as well as excellent adhesion to a variety of ferrous and non-ferrous substrates (including various plastics), EPS 2506 is an excellent choice for both DTM primers and topcoats. |
| EPS® 2507 |
| EPS 2507 is an APEO free, self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness developement. EPS 2507 provides the capability to formulate coatings at very low VOCs. |
| EPS® 2510 |
| EPS 2510 is an APEO free, styrenated acrylic emulsion offering excellent early water / humidity resistance and abrasion resistance. EPS 2510 can be formulated using a wide variety of co-solvents and offers excellent shear stability for use in the grind phase of the formula. EPS 2510 also offers excellent adhesion to most ferrous and non-ferrous substrates and is also an excellent choice for both DTM primers and topcoats. Early hydrophobic properties of EPS 2510 make it an excellent choice for high performance waterproofing paints on cementious substrates. |
| EPS® 2512 |
| EPS 2512 is a styrenated acrylic emulsion offering alkyd-like gloss, corrosion and chemical resistance, as well as excellent early water and humidity resistance. EPS 2512 provides the capability to formulate coatings well below 100 grams/liter VOC. |
| EPS® 2533 |
| EPS 2533 is an APEO free, styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS 2533 provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a universal primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. |
| EPS® 2535 |
| EPS 2535 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development / gloss retention. EPS 2535 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. |
| EPS® 2538 |
| EPS 2538 is a styrenated acrylic emulsion offering excellent hardness and resistance properties. EPS 2538 provides paint formulators a low VOC waterborne alternative to solvent-based finishes on cementitious, wood and plastic substrates. |
| EPS® 2539 |
| EPS 2539 is a self-crosslinking, styrene-acrylic emulsion designed for clear wood applications. It is supplied at a pH near 7.0 for wood applications where maintaining a light color is critical. DPnB at 20% on resin solids is the recommended coalescing solvent. 2.5 to 5.0 % plasticizer such as Santicizer 160 (or similar) on resin solids may be used to help with film formation and to keep the film flexible. Ammonia should be used to raise the pH of the coating. |
| EPS® 2540 |
| EPS 2540 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance and high gloss development / gloss retention. EPS 2540 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, wood and plastic substrates. |
| EPS® 2545 |
| EPS 2545 is an alkali strippable, styrenated acrylic dispersion offering excellent early water resistance. The very small particle size and ability to re-solubilize itself also make the EPS 2545 an ideal vehicle for interior wood wiping stains. |
| EPS® 2548 |
| EPS 2548 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss, corrosion and chemical resistance, as well as early water resistance and rapid hardness developement. EPS 2548 uses a proprietary internal coalescent system, and therefore requires less external co-solvent to achieve full coalescence, providing the capability to easily formulate coatings at 100 grams/liter. |
| EPS® 2550 |
| EPS 2550 is an APEO free, styrenated acrylic emulsion which can be used to formulate economical coatings offering excellent hardness, gloss, and chemical resistance. Coatings produced with EPS 2550 also exhibit good block resistance and excellent adhesion to plastics, ferrous and non-ferrous metals. |
| EPS® 2560 |
| EPS 2560 is a styrenated acrylic emulsion offering outstanding corrosion resistance, adhesion, early water resistance, high gloss development and gloss retention. EPS 2560 provides paint formulators a low VOC waterborne alternative to alkyd maintenance vehicles and general product finishes on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. |
| EPS® 2561 |
| EPS 2561 is a styrenated acrylic dispersion offering low temperature cure response, without the use of acid catalysts. Coatings based on EPS 2561 have been found to exhibit good corrosion resistance and excellent adhesion to plastics and ferrous and non-ferrous metals, including brass. These coatings have also shown to have good hydrolytic and mechanical stability, and can be formulated to a potential finished VOC of less than 0.5 lbs. per gallon (60 grams/liter). |
| EPS® 2568 |
| EPS 2568 is a styrenated acrylic emulsion designed for use in clear and pigmented coatings that exhibit excellent hardness development with good humidity and corrosion resistance. Use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. |
| EPS® 2574 |
| EPS 2574 is a styrenated acrylic emulsion offering excellent hardness, block resistance and early water resistance. EPS 2574 provides paint formulators a low VOC waterborne alternative to solvent-based resins and is ideal for use on ferrous and non-ferrous metals, cementitious, wood and plastic substrates. |
| EPS® 2581 |
| EPS 2581 is a styrenated acrylic emulsion offering excellent early water resistance and high gloss. EPS® 2581 provides paint formulators a low VOC waterborne alternative to solvent-based systems where water resistance and hardness are required on cementitious, wood and some metal substrates. |
| EPS® 2609 |
| EPS 2609 is a water dispersible alkyd offering excellent wood penetration, adhesion, and excellent exterior durability. EPS 2609 provides paint formulators a low VOC alternative to high VOC solvent-based stains. The unique water dispersible chemistry of the EPS 2609 offers superior in-can stability properties making this vehicle an ideal choice for exterior stains and interior wiping stains. |
| EPS® 2708 |
| EPS 2708 is an all-acrylic emulsion designed for high alkaline applications. It can be used as a polymer admixture for cement-based products or as a binder for coatings and primers over cementitious substrates. |
| EPS® 2721 |
| EPS 2721 is a self-crosslinking all-acrylic emulsion designed for VOC compliant high gloss coatings. Exterior durability testing is in progress. |
| EPS® 2734 |
| EPS 2734 is an all-acrylic emulsion offering excellent exterior durability and adhesion for use in exterior flat and satin finish house paints. EPS 2734 Can be Formulated to Under 50 VOC with Texanol. |
| EPS® 2792 |
| EPS 2792 is an all-acrylic emulsion that is an excellent choice for high performance flat through semi-gloss interior architectural and institutional coatings. EPS 2792 is an environmentally friendly polymer with a low coalescent demand and does not contain APEO raw materials. |
| EPS® 2822 |
| EPS 2822 is a styrenated acrylic emulsion offering outstanding ink and tannin blocking characteristics, adhesion, and early water resistance. EPS 2822 provides paint formulators a low VOC waterborne alternative to solvent-based primers and is ideal for use as a primer or low gloss topcoat on ferrous and non-ferrous metal, cementitious, wood and plastic substrates. |
| EPS® 2851 |
| EPS 2851 is a self-crosslinking, styrenated acrylic emulsion offering excellent gloss and chemical resistance, as well as early water resistance. EPS 2851 provides the capability to formulate coatings below 100 grams/liter, and has been found to provide exceptional results in corrosion resistance testing. |
| EPS® 9147 |
| EPS 9147 is a low VOC coalescent for acrylic emulsions· EPS 9147 is a permanent coalescent that remains in the paint film. Unlike conventional plasticizers, the EPS 9147 resists exudation to the surface of the paint. |
To top |
